BDTGS - 810 (CS-5560-01)

  • MSDS: BDTGS
  • Manufacturer: PENNWALT CORP
  • Product Name: 810 (CS-5560-01)
  • National Stock Number: 6850-00-282-6770
Product Identification

Product ID:810 (CS-5560-01)
MSDS Date:01/01/1985
FSC:6850
NIIN:00-282-6770
MSDS Number: BDTGS

Responsible Party
PENNWALT CORP
THREE PARKWAY
PHILADELPHIA, PA 19102
US

Emergency Phone: 215-587-7695

Info Phone: 215-587-7695

Cage: 2H597

Contractor
PENNWALT CORP
CORNWELLS HEIGHTS, PA 19020 US

Telephone: 215-245-3128

Cage: 2H597

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 10%

OSHA PEL 1 MG/M3/3 STEL

ACGIH TLV: 1 MG/M3/3 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:CORROSIVE TO EYES, IRRITATING TO SKIN

First Aid

First Aid:EYE & SKIN:FLUSH WITH WATER & GET MEDICAL ATTENTION,
INGESTION:DO NOT INDUCE VOMITING & GIVE PLENTY OF WATER. GET
MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR.

Fire Fighting

Flash Point:60F (TCC)
Lower Limits:1.8
Upper Limits:10.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:FLUSH WITH WATER

Handling

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS
Other Precautions:WASH THOROUGHLY AFTER HANDLING

Exposure Controls

Ventilation:TO KEEP VAPOR CONCENTRATIONS BELOW TLV
Eye Protection:GOGGLES
Supplemental Safety and Health
TYPE II OF SPECIFICATION

Chemical Properties

HCC:F2
Vapor Pres:71
Vapor Density:2.42
Spec Gravity:1.08
Evaporation Rate & Reference:1 (WATER = 1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS LIQUID
Percent Volatiles by Volume:71

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES
Hazardous Decomposition Products:OXIDES OF CARBON
Conditions to Avoid Polymerization:HEAT, OPEN FLAMES, SPARKS, IGNITION
SOURCES

Disposal

Waste Disposal Methods:CONSULT FEDERAL, STATE OR LOCAL AUTHORITIES FOR
PROPER DISPOSAL PROCEDURES

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.